Thermorail specifications include the use of #304 Stainless Steel, a high grade of stainless steel. All are available with right hand concealed (hard wired) or exposed (plug-in) wiring options.
With concealed wiring, rails can be mounted upside down with the wiring passing through the left hand top bracket.

The concealed wiring option gives a truly contemporary and smart look.
Rails are self-regulating, meaning they will not
overheat and have low wattage making them very efficient to run. Rails are usually wired through a timer or wall switch.

Installation instructions are included with the
rail. These units however must be installed
by a licensed electrician. It is recommended
they be installed 600mm above the floor and
electrical connections must be 600mm away
from water.
Your safety is our concern. All Thermorail
heated towel rails comply with AS/NZS60335
and AS/NZS3820 safety standards with an
IP34 rating. Rails have a 3 year warranty on
manufacturing quality.

Straight/Round Thermo Rail 8 Bar



Curve/Round Thermo Rail 8 Bar

Thermorail non-heated rails boast the same quality features as the heated models but with larger spacing between rails & no heating element. Both rails have 32mm upright and 20mm vertical rails, one with square & the other with round tube.
Manufactured from high quality stainless steel, the single and double adjustable rails are built to last and have the advantage of being able to be cut to size on site for varying situations. Other sizes and designs are available on request.